B&W Trailer Hitches is the manufacturer of high quality truck beds and trailer hitches. Started in a small garage in Humboldt, Kansas 20 years ago, B&W's products are now produced in a state-of-the-art facility that houses a skilled workforce of craftsmen and the most technologically advanced equipment available. B&W has become an industry leader by challenging the status quo and inventing unique solutions that solve towing problems for customers. Call to schedule your installation today!

Turnover Ball Hitches

Solve your own Gooseneck Dilemma with a B&W Turnover Ball Hitch from Haylett's North Country

30,000 lb GTW / 7,500 lb VTW
#1 Hitch in America
Convert from a hitch to a level bed in seconds
Meets all OEM fastening requirements
Precise fit and installation for all full-sized trucks
Bolts to existing holes in the frame with no drilling or welding
Installs under the bed with no bed removal
Requires only a 4" hole in the bed
Gives you the rugged versatility you want
Seven towing accessories to accommodate all your needs
Powder coated for a durable and long lasting finish
Limited Lifetime Warranty
All components manufactured in the U.S.A.

In 1991, B&W designed and patented a truly innovative solution to the gooseneck dilemma; how to get the ball out of the bed when not towing a trailer. The solution was simple and ingenious. A 4" hole is cut in the bed to accomodate the ball and the mounting system is beneath the bed, bolted to the frame. A spring-loaded handle is attached to a 5/8" steel locking pin that goes through the ball. When you're using the hitch, the handle allows you to retract the pin and stow the ball, upside-down, in the same receiver. The design was quickly accepted as a great improvement to the welded-in-ball and fold-down plates used at the time.

B&W has designed a Turnover Ball for every full-sized truck on the market so there is a model that fits your truck exactly. This is done so that installing the hitch requires the least amount of modifications to the truck frame... modifications that could void the manufacturer's warranty. From the cross members and center section , to the sideplates and socket top , each part of our hitch is designed with you in mind. Even our safety chain brackets are installed specifically for your truck.

The Turnover Ball has been professionally tested and is rated to 30,000 lbs Gross Trailer Weight (GTW) and 7,500 lbs Vertical Tongue Weight (VTW). But even more important to us is the fact that the Turnover Ball is time tested. Customers have been hauling their precious cargo with the Turnover Ball for over fifteen years, and it has an impeccable safety record. It's easy to see why; B&W, like Haylett's North Country, is committed to quality! All components are made at their state-of-the-art manufacturing facility in Kansas. Because we're so confident in the Turnover Ball, we offer a lifetime limited warranty.

Companion Fifth Wheel Hitches

Companion Assembly Design allows for Installation in just Ten Minutes!!

18,000 GTW
Easily convert from a hitch to a level bed
Requires no mounting rails to secure the hitch to the truck bed
Vibration dampening polyurethane bushings provide a quiet, rattle-free towing experience
Cam action latching handle offers effortless hook up and release, even under pressure
Full 1 1/8" wrap around locking jaws for a worry free connection and a smooth tow
Fully articulating head allowing front to back and side to side pivoting
Patented hydraulic dampener permitting a controlled 7 degree side to side tilt.
Three vertical adjustments from 14.75 inches to 16.75 inches
Three positions giving you four inches of horizontal adjustment
Rugged wide stance engineered for improved stability and strength
Powder coated for a nice looking, durable, long lasting finish
All components manufactured in the U.S.A.

True to B&W's original concept of designing hitches that allow truck owners to 'use' their truck when not towing, their engineers tackled the 5th Wheel RV Hitch design. Most conventional 5th Wheel Hitches use an 'in-the-bed' rail system for fastening the hitch to the truck, but these rails prove to be unwieldy. The Companion is actually an 'accessory' to the Turnover Ball Gooseneck Hitch and utilizes the Turnover Ball as the 'mounting system'. Therefore, just like the Turnover Ball, the only hole required in the truck is the 4" round hole, and users can easily remove the hitch from the bed .

The Companion comes in two boxes, one with the base and one with the coupler. To assemble the Companion, two upright arms are attached with 8 bolts, and one post is attached with two U-bolts. The Companion can be assembled in about 10 minutes.

The mounting kit that the Companion uses is the Turnover Ball system. The underbed mounting system is truck specific and installs with no drilling, welding, or bed removal in about an hour. The Companion should not be mounted using any other mounting method.

Aside from safety, probably the most important benefit a hitch can provide is a great ride. When B&W's engineers were designing the Companion, a major emphasis was on providing the smoothest ride available. If you've ever pulled a 5th Wheel trailer with another hitch, you know how stopping and starting can nearly give you whiplash! That's because traditional latching systems don't match the kingpin tightly. Our hitch was engineered with locking jaws that perfectly fit the king-pin meaning that there are no sloppy starts and stops. In addition, the coupler of the Companion sits on arms that are coated with polyurethane bushings . This means that where other hitches give you metal on metal contact, the Companion gives you a cushioned, quiet ride. Finally, instead of just front-to-back cushion, the Companion features a built-in shock absorber that allows gentle side-to-side movement without the slamming. This is a ride you deserve to experience!

Tow & Stow Receiver Hitches

The only hitch you'll ever need.

10,000 lb GVWR / 1,000 lb MTW
Eliminate the need for multiple ball mounts
Stows under the vehicle when not in use
Keeps the hitch out of the way of shins and garage doors
Manufactured from steel for a lifetime of reliable towing
Fits any standard 2 inch receiver hitch
Rotate the ball to the desired size
Raise or lower the hitch in one inch increments for a safe level tow
Tri-ball mount is 1 7/8" x 2" x 2 5/16"
Dual Ball is available in 2 5/16" x 2" or 1 7/8" x 2"
Four High Quality Accessories Available
Powder coated for a durable and long lasting finish
Tow & Stow with Browning Logo is also available

The Tow & Stow Receiver Hitch offers the same high quality construction, reliability, strength, and versatility that B&W is known for. Because it is adjustable in height (in one-inch increments) and has multiple ball sizes, the Tow & Stow is truly the only hitch you'll ever need.

Have you ever knocked your shin on a bumper hitch or shut your garage door on it? We have. That's why we think the stowing feature is one of the best features of the Tow & Stow. Just by pulling two pins, the hitch can be stowed out of the way. The hitch has a single locking point, too, so with just one lock you can be sure it will be there, ready to pull whatever comes your way.

The Tow & Stow Hitch is also available as a Pintle Hitch. The Tow & Stow Pintle Hitch has the same high quality construction and great features as the Tow & Stow Receiver Hitch. The Pintle offers a 14.5" vertical height adjustment, giving you the perfect tow every time. Use the Tow & Stow as a Pintle or Standard Ball mount and easily hook up to any trailer.

Return to our

Parts Department